Recurring Revenue Authors: Elizabeth White, Yeshim Deniz, Xenia von Wedel, Liz McMillan, Carmen Gonzalez

Related Topics: Java IoT, Recurring Revenue

Java IoT: Blog Feed Post

JDev 11g: Programmatic Contextual Events

The point of the programmatic Contextual Event solution is to move away from a declarative approach

This post is yet another Contextual Event blog description with a slight programmatic twist. It was inspired by Lucas Jellema's OTN forum post on how to raise programmatic Contextual Events, and in addition uses techniques as demonstrated by Pino and Frank described below.

Readers might be interested in a thread on the ADF EMG about the design of Contextual Events in the ADF framework, and the idea of Implicit Contextual Events - The Rise and Rise of Contextual Events (or the birth of Implicit Contextual Events).

In that ADF EMG thread I allude to a near "million blogs" that already describe Contextual Events as supporting collateral for Oracle's documentation. If you're interested in other posts check out Pino Jeddah's or Frank Nimphius's screencasts.

While I certainly find the screencasts informative, for my own documentation purposes this blog lists out the whole set of steps 1 by 1. Once again readers hopefully will find it useful.

The point of the programmatic Contextual Event solution is to move away from a declarative approach which isn't ideal in all cases. In our specific use case we wanted programmatic control over the payloads between the publisher and consumer. In turn as of JDev I'm not yet satisfied with the IDE's support for Contextual Events and payloads via the pageDef binding design editor; a code solution provides a level of transparency when coupled with the debugger.

It's worth pointing out from Lucas's OTN forum post this programmatic solution is only a half way house, it still requires an "event" binding in the relating pageDef files, however the event payloads themselves are dynamic and fully configurable in code.

Contextual Event Definitions

For the purposes of this blog entry, I'll be describing the 2 players in the Contextual Event scenario as the "Publisher" and the "Consumer".

The Contextual Event "Publisher" will be a standalone Bounded Task Flow (BTF) comprised of page fragments, that has been JARed as an ADF Library. We'll refer to this as the PublisherBTF. The PublisherBTF will be comprised of a single BTF with a single page fragment "PublisherPageFragment" containing a single button to raise events – very simple.

The Contextual Event "Consumer" will be a master ADF application, or in other words an application that calls the "PublisherBTF" and embeds it in a region within a page. We'll refer to this as the ConsumerMasterApp.


The goal for this blog is to demonstrate when a button is pressed in the PublisherBTF, a programmatic Contextual Event is raised via the button's ActionListener, with some coded payload, that the event is captured and handled by the ConsumerMasterApp. At the result of this blog, the payload itself is immaterial, it's the technique that's important.

Preparing the PublisherBTF

In this section I describe the setup of the PublisherBTF before we address configuring the solution for Contextual Events. As such I wont go through step by step setup instructions, I assume readers are familiar with the basics described here.

The PublisherBTF is a standard ADF Application, comprised of a Model & ViewController project. In turn the ViewController contains a single BTF "PublisherBTF.xml" containing a single fragment "PublisherPageFragment".

The BTF has only the fragment:

The fragment is comprised of the following code:

As can be seen the button via it's ActionListener refers a JSF bean "publisher" configured as follows:

The PublisherBean's doAction() method is where we'll raise the Contextual Event programmatically as described in the next section. Currently the method does nothing:

package view;

import javax.faces.event.ActionEvent;

public class PublisherBean {
public PublisherBean() {

public void doAction(ActionEvent actionEvent) {
// Add event code here...
Finally the PublisherPageFragment requires a relating pageDef bindings file, created by right clicking the open fragment in the design or editor mode, and selecting Go to Page Definition using the resulting dialog to generate the empty bindings file:

Raising the Contextual Event Programmatically from the PublisherBTF

Our goal is to raise the Contextual Event via the commandButton's doAction method() programmatically. A requirement for the code is that we have an Event binding published in the relating page fragment's pageDef file.

The easiest way to do this is to select the commandButton in the page fragment, then via the Property Inspector locate the subsection entitled Contextual Events, and select the green plus button, opening the Publish Contextual Event dialog:

From here we enter a name "publisherEvent". In the JDev and releases this dialog appears to have a fault in that it doesn't populate the Type field. Implicitly it should know if we're creating events from commandButtons the Type should be "Action Event" (or "Value Change Event" for fields). This may work in later releases, here I've just entered the text.

The result of this operation is a little hard to see in the pageDef designer. Instead the Structure Windows shows a "eventBinding" containing an "events" binding with one "event" binding called "publisherEvent" are created on your behalf:

For the record the relating pageDef XML code:


Note the ActionListener class in the eventBinding; we'll be raising the event from a commandButton so this configuration is important. In the example above I've also changed the eventBindings id from the default value "eventBinding" to "publisherEventBinding". This will make it easier to understand what's happening in our upcoming programmatic code.

From creating the eventBinding, the actionListener property of the commandButton will have been modified to call the eventBinding directly. We don't want this as we want to programatically raise the event. As such restore the original EL expression to call the PublisherBean's doAction method:

At this point this establishes the bindings required for raising the event. On returning to the PublisherBean's doAction() method, the following custom code demonstrates retrieving the eventBinding, setting up a payload and raising the event programmatically:

package view;

import java.util.Map;

import javax.faces.component.UIComponent;
import javax.faces.event.ActionEvent;
import javax.faces.event.ActionListener;
import oracle.adf.model.BindingContext;
import oracle.binding.BindingContainer;
import oracle.jbo.uicli.binding.JUEventBinding;

public class PublisherBean {
public PublisherBean() {

public void doAction(ActionEvent actionEvent) {

UIComponent component = actionEvent.getComponent();
Map attributes = component.getAttributes();

attributes.put("someParameter", "A String Value");
attributes.put("anotherParameter", Integer.valueOf(1234));

BindingContainer bindingContainer = BindingContext.getCurrent().getCurrentBindingsEntry();
JUEventBinding eventBinding = (JUEventBinding)bindingContainer.get("publisherEvent");

ActionListener actionListener = (ActionListener)eventBinding.getListener();
In this code the technique to raise the event and pass a variable payload is:

a) Retrieve the commandButton that raised the actionEvent as an UIComponent
b) Retrieve the UIComponent's attributes
c) Add 2 arbitrary attributes, in this case a String and Integer

This establishes the payload to send. What you send in terms of attribute names and data types is your choice. You could augment this code to fetch data from other value bindings, call Java code, whatever you need to do to get the data.

On completing this we move onto raising the event programmatically:

d) Fetch the page fragment's BindingContainer
e) Retrieve the eventBinding by it's id "publisherEventBinding" – note this maps back to the eventBinding id we changed in the pageDef file
f) Retrieve the eventBinding's ActionListener – this was also configured in the eventBinding in the pageDef file
g) Execute/process the action

This concludes the configuration of the PublisherBTF for raising events.

Preparing the ConsumerMasterApp

Similar to the PublisherBTF, in this section I'll describe the required skeleton of the consuming master ADF application. I'll assume readers are familiar with the basics without describing everything step by step.

The ConsumerMasterApp contains a standard Model/ViewController project setup with a single JSF page in the ViewController called ConsumerPage.jspx.

The PublisherBTF ADF Library JAR will be attached to the ConsumerMasterApp's ViewController project.

The ConsumerPage.jspx will have the PublisherBTF embedded in the page as a region as follows:

xmlns:h="http://java.sun.com/jsf/html" xmlns:af="http://xmlns.oracle.com/adf/faces/rich">

Consuming the Contextual Event Programmatically in the ConsumerMasterApp

To configure the ConsumerPage to receive the event, we need:

a) a binding to receive the event and pass it to the handler method
b) a handler, essentially a Java class method to receive the event from the binding

To do this we create the handler first, then the binding to call the handler, then we back fill the handler's method code to retrieve the data.

To create the Handler, in the ConsumerMasterApp we create a bean ConsumerBean as follows:

package consumer.view;

public class ConsumerBean {

public void handleEvent(Object payload) {
// Add handler code here....
Note the handleEvent() method we've also added, this will eventually be called via the binding to allow us to programmatically handle the event.

The event binding requires that the handler be exposed as a Data Control. This is done by right clicking the ConsumerBean in the Application Navigator and selecting the Create Data Control option:

From this operation an xml file is created for the relating Data Control, and under the Data Control accordion in the Application Navigator, you will now see the ConsumerBean exposed (if you don't, click the refresh button in the Data Control accordion):

Finally to configure the handler, on the consuming page we create a methodAction binding in the resulting pageDef. This is done by selecting the Bindings and Executables tab, then the green plus button invoking the Insert item dialog where we select methodAction:

In the resulting Create Action Binding dialog, select the ConsumerBean Data Control, then the handleEvent() operation, leaving all else as default:

Selecting ok creates the associated methodAction binding:

Given we now have a handler to receive the event, we configure the ConsumerPage's bindings to subscribe to the PublisherBTF's event. To do this we open the ConsumerPage's pageDef file, selecting the Contextual Events tab, followed by the Subscribes tab and the green plus button. This opens the Subscribe to Contextual Event dialog where we will select the event to subscribe to, and the handler to action the received event:

Selecting the Looking Glass button on the Event field allows us via the resulting Select Contextual Event dialog to select the event "publisherEvent" from the PublisherBTF. Note it's possible to select the event from both the embedded PublisherBTF within the region of the ConsumerPage, or the event from the ADF Library. As the BTF has already been configured in the ConsumerPage, use the former:

On returning to the Subscribe to Contextual Event dialog the Type field will now map to an Action Event. As the "publisherEvent" name might not be unique across all BTFs you consume, you can filter the event by specifically specifying the BTF that raised it via the Publisher poplist:

If you select "Any", by design regardless of the BTF that raises the "publisherEvent", your handler will be called. We'll take the Any option for this simple example.

Next selecting the Handler button, from the Select Handler dialog we can select the handleEvent method we exposed as a methodAction binding:

Returning to the Subscribe to Contextual Event dialog, under the Parameters tab we create the following entry:

What this entry does is map the generic incoming data payload to the parameters of the handler method. Note the Name of the parameter is lowercase "payload" that matches to the ConsumerBean handleEvent() method's input parameter name. The IDE gives you no support in getting this correct, so it's up to you to make them match. In addition note the EL expression "#{payLoad}". Again notice the words are lowercase but there is a capital "L". Again the IDE gives you no support in getting this correct. I had a bit of whine about this in a previous blog post. Note if you get these wrong, the runtime behaviour is the event will still be called, yet no payload will be passed, which is a bit of a pain to debug.

For reference what you'll see in the pageDef designer:

And the resulting pageDef code:



RequiresUpdateModel="true" Action="invokeMethod" MethodName="handleEvent" IsViewObjectMethod="false">

At this point we've the handler configured, we've subscribed to the event, and on the event being called the handler will be called on our behalf. What's left is for us to add our code to the ConsumerBean handleEvent() method:

package consumer.view;

import javax.faces.component.UIComponent;
import javax.faces.event.ActionEvent;

public class ConsumerBean {

public void handleEvent(Object payload) {

ActionEvent actionEvent = (ActionEvent)payload;
UIComponent component = (UIComponent)actionEvent.getSource();

String someParameter = (String)component.getAttributes().get("someParameter");
Integer anotherParameter = (Integer)component.getAttributes().get("anotherParameter");

// Do something with the data
Of interest in the code, the payload itself is the actual ActionEvent raised via the PublisherBTF. From the ActionEvent it's possible to grab the UIComponent that raised the event, who in turn carries the data payload via its attributes. Note how we can cast the parameters/attributes back to the source class, which implies we can use sophisticated Java class constructs as parameters if required.

This concludes what needs to be setup. From here in your handleEvent() bean you're free to do whatever you need to with the data, possible write it to a binding, or pass it to another Java method and so on. In turn of course you don't even have to pass a payload, simply raising the event maybe all you require for the consuming application to do something.


The example PublisherBTF and ConsumerMasterApp ADF applications are available as a single zip. Note the ConsumerMasterApp is dependent on the ADF Library JAR generated via the PublisherBTF. You'll need to generate/deploy your own PublisherBTF ADF Library JAR, then remap the ConsumerMasterApp's ViewController ADF Library mapping to wherever the dependent JAR is located.


What may appear to be a lot of steps for configuring Contextual Events then handling them programmatically, actually becomes second nature after a couple of trials. Basically in the publisher you need to:

1) Create an eventBinding
2) Via a commandButton actionListener grab the eventBinding in code, attach a payload, and execute the event

From the consumer we need to:

1) Create a handler method
2) Publish the handler class as a Data Control
3) Create a methodAction binding for the Data Control
4) Subscribe to the publisher event, mapping the event and its payload to the method and its parameters
5) Returning to handler method, retrieve the parameters via the ActionEvent UIComponent

The benefit of the programmatic approach is you're now free to pass around any data payload with the flexibility of Java code. Without a doubt this doesn't replace the declarative solution to Contextual Events, but it's certainly good to know, and is much easier to debug as there's real code to place breakpoints.


This blog entry was written against JDev

Read the original blog entry...

More Stories By Chris Muir

Chris Muir, an Oracle ACE Director, senior developer and trainer, and frequent blogger at http://one-size-doesnt-fit-all.blogspot.com, has been hacking away as an Oracle consultant with Australia's SAGE Computing Services for too many years. Taking a pragmatic approach to all things Oracle, Chris has more recently earned battle scars with JDeveloper, Apex, OID and web services, and has some very old war-wounds from a dark and dim past with Forms, Reports and even Designer 100% generation. He is a frequent presenter and contributor to the local Australian Oracle User Group scene, as well as a contributor to international user group magazines such as the IOUG and UKOUG.

IoT & Smart Cities Stories
Predicting the future has never been more challenging - not because of the lack of data but because of the flood of ungoverned and risk laden information. Microsoft states that 2.5 exabytes of data are created every day. Expectations and reliance on data are being pushed to the limits, as demands around hybrid options continue to grow.
Dion Hinchcliffe is an internationally recognized digital expert, bestselling book author, frequent keynote speaker, analyst, futurist, and transformation expert based in Washington, DC. He is currently Chief Strategy Officer at the industry-leading digital strategy and online community solutions firm, 7Summits.
With 10 simultaneous tracks, keynotes, general sessions and targeted breakout classes, @CloudEXPO and DXWorldEXPO are two of the most important technology events of the year. Since its launch over eight years ago, @CloudEXPO and DXWorldEXPO have presented a rock star faculty as well as showcased hundreds of sponsors and exhibitors! In this blog post, we provide 7 tips on how, as part of our world-class faculty, you can deliver one of the most popular sessions at our events. But before reading...
If a machine can invent, does this mean the end of the patent system as we know it? The patent system, both in the US and Europe, allows companies to protect their inventions and helps foster innovation. However, Artificial Intelligence (AI) could be set to disrupt the patent system as we know it. This talk will examine how AI may change the patent landscape in the years to come. Furthermore, ways in which companies can best protect their AI related inventions will be examined from both a US and...
Charles Araujo is an industry analyst, internationally recognized authority on the Digital Enterprise and author of The Quantum Age of IT: Why Everything You Know About IT is About to Change. As Principal Analyst with Intellyx, he writes, speaks and advises organizations on how to navigate through this time of disruption. He is also the founder of The Institute for Digital Transformation and a sought after keynote speaker. He has been a regular contributor to both InformationWeek and CIO Insight...
DXWorldEXPO LLC, the producer of the world's most influential technology conferences and trade shows has announced the 22nd International CloudEXPO | DXWorldEXPO "Early Bird Registration" is now open. Register for Full Conference "Gold Pass" ▸ Here (Expo Hall ▸ Here)
Bill Schmarzo, Tech Chair of "Big Data | Analytics" of upcoming CloudEXPO | DXWorldEXPO New York (November 12-13, 2018, New York City) today announced the outline and schedule of the track. "The track has been designed in experience/degree order," said Schmarzo. "So, that folks who attend the entire track can leave the conference with some of the skills necessary to get their work done when they get back to their offices. It actually ties back to some work that I'm doing at the University of ...
@DevOpsSummit at Cloud Expo, taking place November 12-13 in New York City, NY, is co-located with 22nd international CloudEXPO | first international DXWorldEXPO and will feature technical sessions from a rock star conference faculty and the leading industry players in the world. The widespread success of cloud computing is driving the DevOps revolution in enterprise IT. Now as never before, development teams must communicate and collaborate in a dynamic, 24/7/365 environment. There is no time t...
The Internet of Things will challenge the status quo of how IT and development organizations operate. Or will it? Certainly the fog layer of IoT requires special insights about data ontology, security and transactional integrity. But the developmental challenges are the same: People, Process and Platform and how we integrate our thinking to solve complicated problems. In his session at 19th Cloud Expo, Craig Sproule, CEO of Metavine, demonstrated how to move beyond today's coding paradigm and sh...
CloudEXPO New York 2018, colocated with DXWorldEXPO New York 2018 will be held November 11-13, 2018, in New York City and will bring together Cloud Computing, FinTech and Blockchain, Digital Transformation, Big Data, Internet of Things, DevOps, AI, Machine Learning and WebRTC to one location.